{"id":10532,"date":"2021-02-19T20:12:11","date_gmt":"2021-02-19T11:12:11","guid":{"rendered":"https:\/\/de.meviy.misumi-ec.com\/help\/?p=10532"},"modified":"2025-12-19T13:00:16","modified_gmt":"2025-12-19T04:00:16","slug":"qualitaetskontrolle-2","status":"publish","type":"post","link":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/technical_info-de-c\/mpb_conditions-de-c\/10532\/","title":{"rendered":"Qualit\u00e4tskontrolle"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

External Appearance Quality Control Range<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Milling Face<\/strong><\/th>\n<\/tr>\n
\"\"<\/td>\n\"\"<\/td>\n\"\"<\/td>\n<\/tr>\n
\n
    \n
  • EN 1.0038 equiv.<\/li>\n<\/ul>\n<\/td>\n
\n
    \n
  • EN AW\u22125052 equiv.<\/li>\n<\/ul>\n<\/td>\n
\n
    \n
  • EN 1.4301 equiv.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
Untreated surface<\/strong><\/td>\n<\/tr>\n
\"\"<\/td>\n\"\"<\/td>\n\"\"<\/td>\n<\/tr>\n
\n
    \n
  • EN 1.0038 equiv.<\/li>\n<\/ul>\n<\/td>\n
\n
    \n
  • EN AW\u22125052 equiv.<\/li>\n<\/ul>\n<\/td>\n
\n
    \n
  • EN 1.4301 equiv.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
      \n \t
    • No hooks and a dot gauge guarantee of scratches of 0.7 mm or smaller.<\/li>\n \t
    • \n \t
      Surface roughness: \u221aRa6.3 or 3.2 [\u221aRz25 or 12.5]<\/div>\n \t
      The surface roughness value conforms to the value set by the user.<\/div>\n \t<\/li>\n \t
    • Depending on the material and size, the product may be shipped with an untreated surface (polishing and rolling).<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t
      Surface Treatment<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\n \n \n \n \n
      Suspension method image<\/td>\n Surface treatment suspension and electrode contact marks<\/td>\n <\/tr>\n
      \"Suspension<\/td>\n \"Anodized<\/td>\n \"Anodized<\/td>\n <\/tr>\n
      <\/td>\n Anodized aluminum (black)<\/td>\n Anodized aluminum(clear)<\/td>\n <\/tr>\n <\/tbody>\n <\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
        \n \t
      • Since film thickness management is difficult for small diameter precision holes, etc., additional machining may be carried out after processing, and as a result, the surface treatment may not remain on the cutting surface.<\/li>\n\n \t
      • Suspension marks and electrode contact marks from surface treatment may remain on the product.<\/li>\n \t
      • The color of the surface-treated product is not guaranteed.<\/li>\n \t
      • The exact color spec cannot be specified using Munsell or RAL values.<\/li>\n \t
      • Color may very, even among products with the same material and surface treatment.<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Example of Red anodizing<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Example of Gold anodizing<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t
          \n
        • \n

          Please refer to the pictures on the left for the color of Red and Gold anodized products.<\/p>\n<\/li>\n<\/ul>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t
          <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Inspection Item<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          Inspections are Carried Out at Each Work Stage and Before Shipment<\/h5>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Dimensional tolerance inspection<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          \"\"<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Using a micrometer<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Fit tolerance inspection<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          \"\"<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Using a limit plug gauge<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Geometric tolerance inspection<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"9733_01_deEN\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          Measurement method: Measure at multiple points using a dial gauge, feeler gauge, height gauge, etc. on a surface plate.
          *Specifying the measurement method or providing an inspection certificate is not available.<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Screw inspection, etc.<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          \"\"<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          ISO2-grade (JIS B 2025) equivalent Bolts pass through in principle.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Appearance inspection<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          \"\"\"\"<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          Inspection with roughness standard specimen,dot gauge,and roughness tester.<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Surface Roughness Inspection\n<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          \"\"\"\"<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\tInspection with roughness measuring instruments and surface roughness comparators\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\tFor surfaces for which no roughness has been specified, a check is made to ensure that the value is within the general tolerance range. For surfaces with specified roughness, a check is made to ensure that the roughness is within the surface roughness range. If the specified value is Ra0.8 or Rz 3.2 or less, test measurements are taken at two or three points with a test length of 5 mm.\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          Angular Tolerance Inspection<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          \"\"<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Using an angle gauge<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

          \n\t\t\t
          \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t
          <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Dimensional Assurance Range<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\n\n\n\n
          Corner chamfering<\/td>\n<\/tr>\n
          \"Corner<\/td>\n\"Corner<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          For sharp corners (C0.5 mm and smaller), the external corner chamfer tolerance is C0.1 mm to 0.5 mm, and the internal corner radius tolerance is R0.5 mm or less.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\n\n\n\n
          Chamfering unspecified hole entrances<\/td>\n<\/tr>\n
          \"Corner<\/td>\n\"Corner<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Entrance chamfer is 0.1 to 0.5 mm or less.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t
          <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Ensure the specified geometric tolerances<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
            \n
          • Specified values are guaranteed per 100 mm.<\/li>\n
          • i.e., If a flatness of 0.05\/100mm is specified<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            – The geometric tolerances for a 100 x 100 plot surface area is considered above<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t
            <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t

            Quality inspection during engraving\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t

            Processing method\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t“Engraving is done either by “laser cutting” or “machining”.
            *The processing method cannot be specified\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t

            Quality precautions for engraving\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
              \n
            • 1. There may be burrs or burns on the engraved area.<\/li>\n
            • 2. If the font size is 3-5mm, depending on the characters, there may be insufficient space between the characters or the characters may be crushed.<\/li>\n
            • 3. Depending on the material and surface treatment, the finish of the engraving may be lighter.<\/li>\n
            • 4. The “font size and angle” on the engraving are approximate values. Dimensional accuracy is not guaranteed.<\/li>\n
            • 5. Depending on the text content, the size may differ from the specified size.<\/li>\n
            • 6. Depending on the total length of the engraving, discrepancies in character spacing and height may occur (guideline: length 90mm or more)<\/li>\n<\/ul>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              Example of engraved surface<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              No surface treatment<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t
                \n
              • Laser engraving<\/li>\n
              • \uff08Material\uff1aEN 1.4301 equiv.\uff09<\/li>\n<\/ul>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                \n\t\t\t
                \n\t\t\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t
                  \n
                • Engraving by machine<\/li>\n
                • \uff08Material\uff1aEN 1.4301 equiv.\uff09<\/li>\n<\/ul>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  With surface treatment<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                  \n\t\t\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t
                    \n
                  • Laser engraving<\/li>\n
                  • \uff08Material\uff1aEN AW\u22125052 equiv.\uff09<\/li>\n
                  • *Black anodize<\/li>\n<\/ul>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                    \n\t\t\t
                    \n\t\t\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t\t\t\t\t
                      \n
                    • Engraving by machine<\/li>\n
                    • \uff08Material\uff1aEN AW\u22125052 equiv.\uff09<\/li>\n
                    • *Clear anodize<\/li>\n<\/ul>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t
                      <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t

                      Quenching Quality Standards<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t

                      About hardening quality assurance<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      The hardness value specified is guaranteed and will be measured and confirmed before shipping.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Material:EN 1.2379 equiv., Surface Treatment:Electroless nickel<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Material:EN 1.1206 equiv., Surface Treatment:Electroless nickel<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Finish without grinding<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Material:EN 1.1206 equiv., Surface Treatment:Electroless nickel<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Finish with grinding<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Inspection marks<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t
                      \n

                      Caution<\/p>\n\n

                        \n
                      • The hardened depth and distribution of heat treated areas may vary depending on the thickness and shape of the material.<\/li>\n
                      • When parts are heat treated, the outer surface tends to be harder, while the inner areas tend to remain softer. During inspection the hardening will be confirmed to be uniform on average.<\/li>\n \t
                      • The surface can be cleaned by sandblasting after hardening. The accuracy is not reduced by this process.\nThe blasting method cannot be specified.<\/li>\n \t
                      • Grinding may be performed during the finishing process.<\/li>\n \t
                      • Grinding cannot be specified. Whether to grind is decided in the factory under the aspect of quality assurance.<\/li>\n \t
                      • Hardness measurement marks may remain in areas.\nTo confirm the inspection points in advance, please add information in the comments and request a manual quote.<\/li>\n<\/ul>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t
                        <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                        \n\t\t\t\t
                        \n\t\t\t\t\t

                        Packaging<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n
                        Interior<\/td>\nExterior<\/td>\n<\/tr>\n
                        Product packaging<\/td>\nSimple 2D diagram<\/td>\nMultiple<\/td>\nSingle<\/td>\n<\/tr>\n
                        \"Individual<\/td>\n\"\"<\/td>\n\"Multiple<\/td>\n\"Small<\/td>\n<\/tr>\n
                        Includes simple 2D diagrams\n\n2 layers of bubble wrap around each side\n\nThe product label will be affixed to the outside before sending.<\/td>\nSent in a box or bubble wrap bag.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t

                        Depending on the size or quantity, it will be a long and heavy item, so it may be delivered separately on a pallet. In that case, the customer needs to receive the cargo with a forklift and dispose of the pallet. In addition, we do not ship high-weight items overseas.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                        \n\t\t\t\t\t\t
                        \n\t\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t

                        pallet + Stretch Film<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t
                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t

                        pallet + Rolled corrugated cardboard<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                        \n\t\t\t\t
                        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                        \n\t\t\t
                        \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

                        Qualit\u00e4tskontrollbereich f\u00fcr Au\u00dfenansicht Fr\u00e4sfl\u00e4che EN 1.0038 equiv. EN AW\u22125052 equiv. EN 1.4301 equiv. Unbehandelte Oberfl\u00e4che EN 1.0038 equiv. EN AW\u22125052 equiv. EN 1.4301 equiv. Keine Haken und eine Punktlehre garantieren Kratzer von 0,7\u00a0mm oder kleiner. Oberfl\u00e4chenrauheit: \u221aRa6,3 oder 3,2 [\u221aRz25 order 12,5] Der Wert f\u00fcr die Oberfl\u00e4chenrauheit entspricht dem vom Benutzer festgelegten Wert. Je nach Werkstoff und Gr\u00f6\u00dfe kann das Produkt mit unbehandelter Oberfl\u00e4che (Polieren und Walzen) geliefert werden. Oberfl\u00e4chenbehandlung Abbildung der Aufh\u00e4ngemethode Oberfl\u00e4chenbehandlung von Aufh\u00e4ngung und Elektrodenkontaktspuren Eloxiertes Aluminium (schwarz) Eloxiertes aluminum(klar) Da das Schichtdickenmanagement f\u00fcr Pr\u00e4zisionsbohrungen mit kleinem Durchmesser usw. schwierig ist, kann nach der Bearbeitung eine zus\u00e4tzliche Bearbeitung durchgef\u00fchrt werden, wodurch die Oberfl\u00e4chenbehandlung nicht auf der Schnittfl\u00e4che […]<\/p>\n","protected":false},"author":15,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[119],"tags":[137],"class_list":["post-10532","post","type-post","status-publish","format-standard","hentry","category-mpb_conditions-de-c","tag-technical_mpb-de"],"views":498,"_links":{"self":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/posts\/10532","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/comments?post=10532"}],"version-history":[{"count":60,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/posts\/10532\/revisions"}],"predecessor-version":[{"id":89476,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/posts\/10532\/revisions\/89476"}],"wp:attachment":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/media?parent=10532"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/categories?post=10532"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/de\/wp-json\/wp\/v2\/tags?post=10532"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}