{"id":21350,"date":"2022-09-01T15:38:26","date_gmt":"2022-09-01T06:38:26","guid":{"rendered":"https:\/\/de.meviy.misumi-ec.com\/help\/?p=21350"},"modified":"2025-12-15T17:29:44","modified_gmt":"2025-12-15T08:29:44","slug":"selectable-nut-sizes","status":"publish","type":"post","link":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/technical_info-en-c\/shm_guideline-en-c\/21350\/","title":{"rendered":"Selectable nut sizes"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Upper limit of the nut's pilot hole diameter<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • On meviy, when you would select nut mounting, please change the hole information indication for mounting holes.<\/li>
  • You can select press-fit, weld (spot), or weld (arc) as the mounting method.<\/li>
  • However, multiple mounting methods cannot be used on the same model.<\/li>
  • The nominal diameters which can be selected depend on the hole diameter of the mounting hole.<\/li>
  • The upper limit of hole diameter is specified for each nominal diameter. Please refer to the table below.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    Press-fit nut<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
    Press-fit nut nominal diameter<\/th>\nUpper limit of the pilot hole diameter (d)<\/th>\nExample<\/th>\n<\/tr>\n
    M3<\/td>\nd \u2266 5.5<\/td>\n\"\"<\/td>\n<\/tr>\n
    M4<\/td>\nd \u2266 7.0<\/td>\n<\/tr>\n
    M5<\/td>\nd \u2266 8.0<\/td>\n<\/tr>\n
    M6<\/td>\nd \u2266 10.0<\/td>\n<\/tr>\n
    M8<\/td>\nd \u2266 13.0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    Weld (spot) nut and weld (arc) nut <\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n
    Weld nut nominal diameter<\/th>\nUpper limit of the pilot hole diameter (d)<\/th>\nExample<\/th>\n<\/tr>\n
    M4<\/td>\nd \u2266 11.0<\/td>\n\"\"<\/td>\n<\/tr>\n
    M5<\/td>\nd \u2266 11.0<\/td>\n<\/tr>\n
    M6<\/td>\nd \u2266 13.0<\/td>\n<\/tr>\n
    M8<\/td>\nd \u2266 15.0<\/td>\n<\/tr>\n
    M10<\/td>\nd \u2266 17.0<\/td>\n<\/tr>\n
    M12<\/td>\nd \u2266 19.0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Maximum number of nuts which can quote automatically<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    • As a condition of the automatic quotation, there is a limit that the number of nuts mounted per model. Please refer to the table below.<\/li>
    • If the number of nuts is more than the limit, meviy support can provide a quotation (request a manual quotation).<\/li>
    • If you wish to use weld (arc) nuts, please request a quotation from meviy support regardless of the number of nuts.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n
      Types of nut<\/th>\nMaximum number of nut which can automatic quotation per model<\/th>\n<\/tr>\n
      Press-fit nut<\/td>\n12<\/td>\n<\/tr>\n
      Weld (spot) nut<\/td>\n12<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      <\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Select the size of nut<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • Selectable sizes vary by material and thickness. Please refer to the table below.<\/li>
      • Nut mounting cannot be selected for perforated metal, shim plates (EN 1.0330 equiv. & EN 1.4301 equiv.) and resin.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t
        Press-fit nut<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
        Material<\/th>\nThickness<\/th>\nPress-fit nut nominal diameter<\/th>\n<\/tr>\n
        \n
          \n \t
        • EN 1.0330 equiv. (EN 1.0320 equiv. (hot coiled))<\/li>\n \t
        • EN 1.0330 equiv.<\/li>\n<\/ul>\n<\/th>\n
        		0.8<\/th>\nM3<\/td>\nM4<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
        1.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.2<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.6<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        2.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        2.3<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        3.2<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        \n
          \n \t
        • EN 1.4301 equiv. (2B)<\/li>\n \t
        • EN 1.4301 equiv. (Single-Sided #400-Grit Polished)<\/li>\n \t
        • EN 1.4301 equiv. (Single-sided hairline finish)<\/li>\n \t
        • EN 1.4016 equiv.<\/li>\n<\/ul>\n<\/th>\n
        		1.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.2<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.5<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        2.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        2.5<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        3.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        EN AW\u22125052 equiv. (Only unprocessed products)<\/th>\n0.8<\/th>\nM3<\/td>\nM4<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
        1.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.2<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.5<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.6<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        2.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        2.5<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        3.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        \n
          \n \t
        • EN AW-5052 equiv. (pre-finished anodized plate (clear))\uff08Clear Anodize\uff09<\/li>\n \t
        • EN AW-5052 equiv. (pre-finished anodized plate (black))\uff08Black Anodize\uff09<\/li>\n<\/ul>\n<\/th>\n
        		1.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        1.5<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\n<\/td>\n<\/tr>\n
        2.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n
        3.0<\/th>\nM3<\/td>\nM4<\/td>\nM5<\/td>\nM6<\/td>\nM8<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t
        Weld (spot) nut <\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t
        Material<\/th>Thickness<\/th>Weld (spot) nut nominal diameter<\/th><\/tr>
        • EN 1.0330 equiv. (EN 1.0320 equiv. (hot coiled))<\/li>
        • EN 1.0330 equiv.<\/span><\/li><\/ul><\/th>
        		0.8<\/th>M4<\/td>M5<\/td>M6<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td><\/tr>
        1.0<\/th>M4<\/td>M5<\/td>M6<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td><\/tr>
        1.2<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td><\/tr>
        1.6<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        2.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        2.3<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        3.2<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        • EN 1.4301 equiv. (2B)<\/li>
        • EN 1.4301 equiv. (Single-Sided #400-Grit Polished)<\/li>
        • EN 1.4301 equiv. (Single-sided hairline finish)<\/li>
        • EN 1.4016 equiv.<\/li><\/ul><\/th>
        		0.8<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        1.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        1.2<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        1.5<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        2.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        2.5<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        3.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        4.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        5.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr>
        6.0<\/th>M4<\/td>M5<\/td>M6<\/td>M8<\/td>M10<\/td>M12<\/td>\u00a0<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

        Upper limit of the nut’s pilot hole diameter On meviy, when you would select nut mounting, please change the hole information indication for mounting holes. You can select press-fit, weld (spot), or weld (arc) as the mounting method. However, multiple mounting methods cannot be used on the same model. The nominal diameters which can be selected depend on the hole diameter of the mounting hole. The upper limit of hole diameter is specified for each nominal diameter. Please refer to the table below. Press-fit nut Press-fit nut nominal diameter Upper limit of the pilot hole diameter (d) Example M3 d \u2266 5.5 M4 d \u2266 7.0 M5 d \u2266 8.0 […]<\/p>\n","protected":false},"author":15,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[110],"tags":[132],"class_list":["post-21350","post","type-post","status-publish","format-standard","hentry","category-shm_guideline-en-c","tag-technical_shm-en"],"views":475,"_links":{"self":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/21350","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/comments?post=21350"}],"version-history":[{"count":32,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/21350\/revisions"}],"predecessor-version":[{"id":89066,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/21350\/revisions\/89066"}],"wp:attachment":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/media?parent=21350"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/categories?post=21350"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/tags?post=21350"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}