{"id":34582,"date":"2024-06-14T15:23:17","date_gmt":"2024-06-14T06:23:17","guid":{"rendered":"https:\/\/de.meviy.misumi-ec.com\/help\/?p=34582"},"modified":"2026-03-09T10:42:56","modified_gmt":"2026-03-09T01:42:56","slug":"%e6%96%b0%e8%a8%ad%ef%bc%9a%e7%b3%b8%e9%9d%a2%e5%8f%96%e3%82%8a_%e6%ac%a7%e5%b7%9e%e8%8b%b1%e8%aa%9e","status":"publish","type":"post","link":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/technical_info-en-c\/shm_conditions-en-c\/34582\/","title":{"rendered":"About Edge Breaking"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Standard Values for Edge Breaking\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Model Example<\/th>\nPart Example<\/th>\nStandard Value<\/th>\n<\/tr>\n
Light Edge Breaking<\/th>\n
C\/R Edge Breaking<\/div>\nOption Name: “All Around R0.2 or Larger \/ Corner C1”\n<\/th>\n<\/tr>\n
\"\"<\/td>\n\n
    \n \t
  • \u2460Corner\n<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
Not Available\n<\/td>\n\n
    \n \t
  • Chamfer model corners with C1<\/li>\n \t
  • Corners less than 30\u00b0 or greater than 170\u00b0 are excluded<\/li>\n \t
  • \"\"<\/li>\n \t
  • Image of chamfered corner<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
\n
    \n \t
  • \u2461Edges of sheet metal surfaces<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
\n
    \n \t
  • Finish burrs and flash generated during sheet metal punching to approx. R0.1\n<\/li>\n<\/ul>\n\"\"<\/td>\n
\n
    \n \t
  • Finish burrs and flash generated during sheet metal punching to R0.2 or larger (approx. R0.3)\n<\/li>\n<\/ul>\n\"\"<\/td>\n<\/tr>\n
\n
    \n \t
  • \u2462Narrow Slit Area<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
No burrs or flash of 0.1 mm or larger<\/td>\nFinish burrs and flash to approx. R0.1<\/td>\n<\/tr>\n
\n
    \n \t
  • \u2463Narrow width, small holes<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
No burrs or flash of 0.1 mm or larger<\/td>\nFinish burrs and flash to approx. R0.1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Appearance of Edge Breaking<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Finish of light Edge Breaking\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
    \n \t
  • There is a possibility of minor scratches on the appearance because a double-sided deburring machine is used for eliminating burrs.<\/li>\n \t
  • Edge breaking and engraving cannot both be specified on the same model. The edge breaking process can cause the engraving to fade.<\/li>\n \t
  • Transparent resin parts will have the edge breaking finish as standard.<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
    Acrylic (transparent), thickness 8.0\u339c<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
    EN 1.4301 equiv. (2B), thickness 3.0 \u339c<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Finish of C\/R Edge Breaking (All Around R0.2 or Larger \/ Corner C1)\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
      \n \t
    • Edges of sheet metal surfaces are chamfered to R0.2 or larger using a double-sided deburring machine, and product corners are chamfered to C1 by laser processing.<\/li>\n \t
    • Fine scratches may occur on the surface during Edge Breaking of edges of sheet metal surfaces.<\/li>\n \t
    • C\/R Edge Breaking is not available when combined with engraving service, as characters may become faint.<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
      Edges of sheet metal surfaces
      EN 1.4301 equivalent (2B), thickness 6.0 mm<\/div><\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
      Edge Breaking of Product Corner
      EN 1.4301 equivalent (2B), thickness 6.0 mm<\/div><\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      \n

      Caution<\/p>\nCases Where Edge Breaking is Restricted<\/u><\/b>\n

      Since Edge Breaking is performed by a deburring machine before bending, narrow slit areas will have a fine chamfer finish (approx. R0.1).\n<\/div>\n
      \n
      <\/div>\n
      <\/div>\n<\/div>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      \n

      Caution<\/p>\nCases Where Corner Edge Breaking is Not available\n<\/u><\/b>\n

      \n
      \n
      1. Model corner includes curves<\/div>\n\n\n<\/div>\n
      \n
      2. Acute angles less than 30\u00b0 and obtuse angles greater than 170\u00b0\n<\/div>\n\n\n<\/div>\n<\/div>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

      Standard Values for Edge Breaking Model Example Part Example Standard Value Light Edge Breaking C\/R Edge Breaking Option Name: “All Around R0.2 or Larger \/ Corner C1” \u2460Corner Not Available Chamfer model corners with C1 Corners less than 30\u00b0 or greater than 170\u00b0 are excluded Image of chamfered corner \u2461Edges of sheet metal surfaces Finish burrs and flash generated during sheet metal punching to approx. R0.1 Finish burrs and flash generated during sheet metal punching to R0.2 or larger (approx. R0.3) \u2462Narrow Slit Area No burrs or flash of 0.1 mm or larger Finish burrs and flash to approx. R0.1 \u2463Narrow width, small holes No burrs or flash of 0.1 […]<\/p>\n","protected":false},"author":60,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[112],"tags":[132],"class_list":["post-34582","post","type-post","status-publish","format-standard","hentry","category-shm_conditions-en-c","tag-technical_shm-en"],"views":676,"_links":{"self":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/34582","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/users\/60"}],"replies":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/comments?post=34582"}],"version-history":[{"count":15,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/34582\/revisions"}],"predecessor-version":[{"id":95372,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/34582\/revisions\/95372"}],"wp:attachment":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/media?parent=34582"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/categories?post=34582"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/tags?post=34582"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}