{"id":9728,"date":"2021-02-02T13:06:04","date_gmt":"2021-02-02T04:06:04","guid":{"rendered":"https:\/\/de.meviy.misumi-ec.com\/help\/uncategorized\/9728\/"},"modified":"2025-12-19T12:45:38","modified_gmt":"2025-12-19T03:45:38","slug":"%e6%a8%b9%e8%84%82%e3%81%ae%e7%b2%be%e5%ba%a6%e4%bf%9d%e8%a8%bc-%e4%bb%a3%e8%a1%a8%e9%9d%a2%e7%b2%97%e3%81%95-%e8%a7%92%e9%83%a8%e3%83%bb%e9%9a%85%e9%83%a8","status":"publish","type":"post","link":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/technical_info-en-c\/mpb_conditions-en-c\/9728\/","title":{"rendered":"Default General Tolerance Standards"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • CNC Milling service does not display dimensions or tolerances when 3D CAD data is uploaded other than external dimensions and hole information, assuming that the customer specifies tolerances of their choice.<\/li>
  • This section describes the finish of parts where dimensions and tolerances are not displayed.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Default General Tolerance Standards for Machined Dimensions
    (Standard products conform to JIS B 0405:1991\/JIS B 0419:1991, International Economy products can conform JIS B 0405:1991\/JIS B 0419:1991 or GB\/T 1804-2000\/GB\/T 1184-1995.)\n<\/div><\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The following standards are applied to the origin according to machining standards.<\/p>

    The origin can be moved to any position.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    Length, Excluding Chamfer, Dimensional Tolerances<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \u00a0<\/p>

    [mm]<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    Product lineup<\/th>Tolerance Grade<\/th>Base Dimensions<\/th><\/tr>
    Symbol<\/th>Description<\/th>\u22650.5 \u22643<\/th>>3 \u22646<\/th>>6 \u226430<\/th>>30 \u2264120<\/th>>120 \u2264400<\/th>>400 \u22641000<\/th><\/tr>
    JIS<\/th>m<\/td>Medium<\/td>\u00b10.1<\/td>\u00b10.1<\/td>\u00b10.2<\/td>\u00b10.3<\/td>\u00b10.5<\/td>\u00b10.8<\/td><\/tr>
    GB<\/th>m<\/td>Medium<\/td>\u00b10.1<\/td>\u00b10.1<\/td>\u00b10.2<\/td>\u00b10.3<\/td>\u00b10.5<\/td>\u00b10.8<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    Tolerances for Chamfer Length Dimensions (Corner Radius or Corner Chamfer Dimensions)<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \u00a0<\/p>

    [mm]<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    Product lineup<\/th>Tolerance Grade<\/th>Base Dimensions<\/th><\/tr>
    Symbol<\/th>Description<\/th>\u22650.5 \u22643<\/th>>3 \u22646<\/th>>6<\/th><\/tr>
    JIS<\/th>C<\/td>Rough<\/td>\u00b10.4<\/td>\u00b11<\/td>\u00b12<\/td><\/tr>
    GB<\/th>m<\/td>Medium<\/td>\u00b10.4<\/td>\u00b11<\/td>\u00b12<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    Angle Dimensional Tolerances<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \u00a0<\/p>

    [mm]<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    Product lineup<\/th>Tolerance Grade<\/th>Length of the Shorter Angle Edge<\/th><\/tr>
    Symbol<\/th>Description<\/th>\u226410<\/th>>10 \u226450<\/th>>50 \u2264120<\/th>>120 \u2264400<\/th>>400<\/th><\/tr>
    JIS<\/th>m<\/td>Medium<\/td>\u00b11\u00b0<\/td>\u00b130\u2032<\/td>\u00b120\u2032<\/td>\u00b110\u2032<\/td>\u00b15\u2032<\/td><\/tr>
    GB<\/th>m<\/td>Medium<\/td>\u00b11\u00b0<\/td>\u00b130\u2032<\/td>\u00b120\u2032<\/td>\u00b110\u2032<\/td>\u00b15\u2032<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    General Tolerances of Perpendicularity<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \u00a0<\/p>

    [mm]<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    Product lineup<\/th>Tolerance Grade<\/th>Nominal Length of the Shorter Edge<\/th><\/tr>
    Symbol<\/th>\u2264100<\/th>>100 \u2264300<\/th>>300 \u22641,000<\/th><\/tr>
    JIS<\/th>K<\/td>0.4<\/td>0.6<\/td>0.8<\/td><\/tr>
    GB<\/th>K<\/td>0.4<\/td>0.6<\/td>0.8<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    General Tolerances of Straightness and Flatness<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \u00a0<\/p>

    [mm]<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    Product lineup<\/th>Tolerance Grade<\/th>Nominal Length<\/th><\/tr>
    Symbol<\/th>\u226410<\/th>>10 \u226430<\/th>>30 \u2264100<\/th>>100 \u2264300<\/th>>300 \u22641,000<\/th><\/tr>
    JIS<\/th>K<\/td>0.05<\/td>0.1<\/td>0.2<\/td>0.4<\/td>0.6<\/td><\/tr>
    GB<\/th>K<\/td>0.05<\/td>0.1<\/td>0.2<\/td>0.4<\/td>0.6<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    (Related) Changing a design’s origin.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Width (Y) and thickness (Z) tolerances of polished flat bar<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\tThe following standards are applied to polished flat bars, depending on the material. As for tolerances for overall length (X) and other dimensions, “Standard for normal tolerances for machining dimensions without indication (extracted from JIS B 0405:1991\/JIS B 0419:1991)” is applied as in the case of other materials.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    EN 1.0038 equiv. (flat bar), EN 1.1191 equiv. (flat bar), EN 1.4301 equiv. (flat bar) Excerpt from JIS G 3123:2004\/ JIS G 4318:2016<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n
    Tolerance Grade<\/th>\nWidth Tolerance\/Thickness Tolerance<\/th>\n<\/tr>\n
    Symbol<\/th>\nDescription<\/th>\n><\/th>\n3<\/th>\n6<\/th>\n10<\/th>\n18<\/th>\n30<\/th>\n50<\/th>\n80<\/th>\n120<\/th>\n<\/tr>\n
    \u2264<\/th>\n6<\/th>\n10<\/th>\n18<\/th>\n30<\/th>\n50<\/th>\n80<\/th>\n120<\/th>\n180<\/th>\n<\/tr>\n
    IT<\/td>\n13<\/td>\n<\/td>\n-0.18-0<\/td>\n-0.22-0<\/td>\n-0.27-0<\/td>\n-0.33-0<\/td>\n-0.39-0<\/td>\n-0.46-0<\/td>\n-0.54-0<\/td>\n-0.63-0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    EN AW \u2013 6063 equiv. (flat bar) Excerpt from JIS H 4040:2015<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    \n
    \n\n\n\n
    Thickness<\/th>\n Width<\/th>\n Thickness Tolerance<\/th>\n Width Tolerance<\/th>\n Thickness<\/th>\n Width<\/th>\n Thickness Tolerance<\/th>\n Width Tolerance<\/th>\n<\/tr>\n<\/thead>\n<\/table>\n<\/div>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    5<\/th>\n15<\/th>\n\u00b10.26<\/td>\n\u00b10.33<\/td>\n12<\/th>\n12<\/th>\n\u00b10.33<\/td>\n\u00b10.33<\/td>\n<\/tr>\n
    20<\/th>\n\u00b10.39<\/td>\n15<\/th>\n<\/tr>\n
    30<\/th>\n20<\/th>\n\u00b10.39<\/td>\n\u00b10.39<\/td>\n<\/tr>\n
    40<\/th>\n\u00b10.33<\/td>\n\u00b10.52<\/td>\n30<\/th>\n<\/tr>\n
    50<\/th>\n40<\/th>\n\u00b10.52<\/td>\n<\/tr>\n
    60<\/th>\n\u00b10.78<\/td>\n50<\/th>\n<\/tr>\n
    100<\/th>\n\u00b11.00<\/td>\n60<\/th>\n\u00b10.46<\/td>\n\u00b10.78<\/td>\n<\/tr>\n
    6<\/th>\n15<\/th>\n\u00b10.26<\/td>\n\u00b10.33<\/td>\n100<\/th>\n\u00b10.52<\/td>\n\u00b11.00<\/td>\n<\/tr>\n
    20<\/th>\n\u00b10.39<\/td>\n15<\/th>\n15<\/th>\n\u00b10.39<\/td>\n\u00b10.39<\/td>\n<\/tr>\n
    30<\/th>\n20<\/th>\n<\/tr>\n
    40<\/th>\n\u00b10.33<\/td>\n\u00b10.52<\/td>\n30<\/th>\n<\/tr>\n
    50<\/th>\n40<\/th>\n\u00b10.52<\/td>\n<\/tr>\n
    60<\/th>\n\u00b10.78<\/td>\n50<\/th>\n\u00b10.52<\/td>\n<\/tr>\n
    100<\/th>\n\u00b11.00<\/td>\n60<\/th>\n\u00b10.46<\/td>\n\u00b10.78<\/td>\n<\/tr>\n
    8<\/th>\n15<\/th>\n\u00b10.33<\/td>\n\u00b10.33<\/td>\n100<\/th>\n\u00b10.52<\/td>\n\u00b11.00<\/td>\n<\/tr>\n
    20<\/th>\n\u00b10.39<\/td>\n20<\/th>\n20<\/th>\n\u00b10.39<\/td>\n\u00b10.39<\/td>\n<\/tr>\n
    30<\/th>\n30<\/th>\n<\/tr>\n
    40<\/th>\n\u00b10.52<\/td>\n40<\/th>\n\u00b10.46<\/td>\n\u00b10.52<\/td>\n<\/tr>\n
    50<\/th>\n50<\/th>\n<\/tr>\n
    60<\/th>\n\u00b10.39<\/td>\n\u00b10.78<\/td>\n60<\/th>\n\u00b10.52<\/td>\n\u00b10.78<\/td>\n<\/tr>\n
    100<\/th>\n\u00b10.46<\/td>\n\u00b11.00<\/td>\n100<\/th>\n\u00b10.59<\/td>\n\u00b11.00<\/td>\n<\/tr>\n
    10<\/th>\n10<\/th>\n\u00b10.33<\/td>\n\u00b10.33<\/td>\n25<\/th>\n25<\/th>\n\u00b10.39<\/td>\n\u00b10.39<\/td>\n<\/tr>\n
    15<\/th>\n30<\/th>\n<\/tr>\n
    20<\/th>\n\u00b10.39<\/td>\n40<\/th>\n\u00b10.46<\/td>\n\u00b10.52<\/td>\n<\/tr>\n
    30<\/th>\n50<\/th>\n<\/tr>\n
    40<\/th>\n\u00b10.52<\/td>\n60<\/th>\n\u00b10.52<\/td>\n\u00b10.78<\/td>\n<\/tr>\n
    50<\/th>\n100<\/th>\n\u00b10.59<\/td>\n\u00b11.00<\/td>\n<\/tr>\n
    60<\/th>\n\u00b10.39<\/td>\n\u00b10.78<\/td>\n30<\/th>\n30<\/th>\n\u00b10.46<\/td>\n\u00b10.46<\/td>\n<\/tr>\n
    100<\/th>\n\u00b10.46<\/td>\n\u00b11.00<\/td>\n40<\/th>\n\u00b10.52<\/td>\n<\/tr>\n
    <\/td>\n50<\/th>\n<\/tr>\n
    60<\/th>\n\u00b10.52<\/td>\n\u00b10.78<\/td>\n<\/tr>\n
    100<\/th>\n\u00b10.59<\/td>\n\u00b11.00<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Resin Precision Assurance<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Unlike metal, resin is a material that easily changes shape or dimensions due to factors such as temperature and humidity. Due to this, precision assurance is performed under the following conditions:
    \u00b7 Inspections are performed in temperature-controlled environments.
    \u00b7 Precision assurance is based on the results of inspections performed immediately before shipment.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Surface Roughness<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    • The default surface roughness reference value is \u221aRa6.3 (\u221aRz25).<\/li>
    • When selecting the surface roughness symbol “Ra” in the user settings or initial quotation conditions, 6.3 or 3.2 can be selected.<\/li>
    • When selecting the surface roughness symbol “Rz”, 25 or 12.5 can be selected.<\/li>
    • The surface roughness is displayed in the tree view and in the bottom left corner of the 3D viewer.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\tSurface Roughness\n\n\n\n\n\n
      Symbol<\/th>\nSelected Value<\/th>\n<\/tr>\n
      Ra<\/th>\n
      6.3<\/div><\/td>\n
      3.2<\/div><\/td>\n<\/tr>\n
      Rz<\/th>\n
      25<\/div><\/td>\n
      12.5<\/div><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Internal and External Corners<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      For external sharp corners or corners of C0.5 and smaller, the finish will be as follows:
      \u00b7 Corners C0.1\u00a0mm to 0.5\u00a0mm or less<\/p>

      \u00a0<\/p>

      For internal sharp corners, the finish will be as follows:
      \u00b7 Internal corners R0.1 to R0.5\u00a0mm or less<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

      CNC Milling service does not display dimensions or tolerances when 3D CAD data is uploaded other than external dimensions and hole information, assuming that the customer specifies tolerances of their choice. This section describes the finish of parts where dimensions and tolerances are not displayed. Default General Tolerance Standards for Machined Dimensions(Standard products conform to JIS B 0405:1991\/JIS B 0419:1991, International Economy products can conform JIS B 0405:1991\/JIS B 0419:1991 or GB\/T 1804-2000\/GB\/T 1184-1995.) The following standards are applied to the origin according to machining standards. The origin can be moved to any position. Length, Excluding Chamfer, Dimensional Tolerances \u00a0 [mm] Product lineup Tolerance Grade Base Dimensions Symbol Description \u22650.5 […]<\/p>\n","protected":false},"author":15,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[118],"tags":[136],"class_list":["post-9728","post","type-post","status-publish","format-standard","hentry","category-mpb_conditions-en-c","tag-technical_mpb-en"],"views":2484,"_links":{"self":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/9728","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/comments?post=9728"}],"version-history":[{"count":40,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/9728\/revisions"}],"predecessor-version":[{"id":60204,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/9728\/revisions\/60204"}],"wp:attachment":[{"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/media?parent=9728"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/categories?post=9728"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/de.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/tags?post=9728"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}