- Technical Information
- [FA Mechanical Parts] Sheet Metal Parts
- Design Guidelines
- Suspension Holes for Plating/Painting
Suspension Holes for Plating/Painting
If you select plating or painting for the surface treatment, suspension holes for the surface treatment will be required.
If the model does not have holes already, be sure to add through holes near the corners or end face of the part.
*Model the holes so that they are around ø4 to ø5.2 mm.
*For models with a length of 420 mm or greater, or for models with a weight that exceeds 8 kg, add at least 2 holes to the model.
Depending on the size and shape of the part, you may need to add more holes or change the suspension holes.
You will be contacted if this is the case.