Thin-Wall Judgment Logic

As shown below, if there is a thin wall below the machining limit, out of tolerance will occur due to tearing or shape deformation during manufacturing. *If there is an overlap between the limit values, the larger value will be given priority.

If the thin wall is below the limit, the “Quality Agreement” will be displayed on the screen. Please check the relevant area on the 3D viewer and answer whether you agree with tears, deformations and out of tolerance.

If you disagree, we will not be able to provide an automatic quotation. If you disagree but still want the same quality as the model, please write “disagree with the quality agreement” or something similar in the comment box and request a manual quote from meviy support. After that, you will receive an official quotation response shortly.

"Straight hole", "Precision hole", "Tapped hole": Thin wall between cylindrical area and other shape elements

Thin Walls between Straight Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Diameterø2 or more
ø5 or less
More than ø5
Machining Limit0.81.0

Thin Walls between Precision Holes and Other Shape Elements

[mm]

Iron, Pre-Hardened Steel, Aluminum, SUS
Diameter ø2 or more
Machining Limit 0.8

[mm]

POM, MC Nylon, Fluorine, UHMWPE, ABS, PEEK
Diameterø2 or more
Machining Limit1.5

[mm]

Bakelite
Diameter ø2 or more
Machining Limit 2.0

Thin Walls between Tapped Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Nominal DiameterM2 or higher
M5 or lower
M6 or higher
M10 or lower
M12 or higher
Machining Limit0.81.01.5

Thin Walls between Insert Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Nominal DiameterM2 or higher
M5 or lower
M6 or higher
M10 or lower
M12
Machining Limit2.03.13.9

Thin Walls between Countersunk Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Diameter (D, d)ø2 or more
ø5 or less
More than ø5
Machining Limit0.81.0

Thin Walls between Countersunk Holes and Other Shape Elements

[mm]

Iron, Pre-Hardened Steel, Aluminum, SUS
Nominal Diameter ø3 or more ø6 or less More than ø6
Machining Limit 0.8 1.0

[mm]

POM, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite
Nominal Diameterø3 or more
Machining Limit1.0

Other Arrangements of Thin Walls and Other Shape Elements

Thin Walls between Straight Section of Slotted Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Machining Limit1.0

Thin Walls between Other Sections of Slotted Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Machining Limit1.0

Thin Walls between Other Sections of Slotted Holes and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Machining Limit1.0

Thin Walls between Other Sections of Pockets and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Machining Limit1.0

Hole Tip and Other Shape Elements

[mm]

All materials (steel, prehardened steel, aluminum, stainless steel, polyacetal, MC Nylon, Fluorine, UHMWPE, ABS, PEEK, Bakelite)
Machining Limit2.0