Adding/Deleting Dimensions and Dimensional Tolerances

Adding Dimensions and Dimensional Tolerances

You can add dimensions and dimensional tolerances. You can also add dimensional tolerances to the initial display.

Click and then click 2 points (center of a hole, center of the arc of a slotted hole, a face, or side) to which you want to add dimensions.
Click where you want the dimensions to be displayed.

Tip

By selecting

and clicking [OK] in the displayed dialog box, you will be able to batch add coordinate dimensions based on the origin point.

3. Select a dimensional tolerance from the drop-down menu.

If the desired tolerance is not listed, specify the tolerance using [Free Input].

You can delete dimensions and tolerances that you no longer require by using the 3D viewer tool “Delete settings”.

Click

and then click the dimensions you want to delete.

Notes

Initial display information such as the external dimensions and hole information cannot be deleted.
Select [Delete all settings] in the [Delete settings] dialog box to delete all settings except that which is part of the initial display.